Fasteners
Campbell Anchor Shackle, Working Load Limit: 3-1/4 ton, Industrial Grade, Trade Size: 5/8 in, Inside Length: 2.44 in, Inside Width: 1.56 in, Width Between Eyes: 1.06 in, Pin Type: Screw, Pin Diameter: 3/4 in, Carbon Steel, Galvanized
For playground and gymnasium equipment (1/0 and larger), farm and animal chains and many general-purpose applications. Do Not Use for overhead lifting. *Not Recommended for swing sets, the Playground Equipment Association, which has adopted the min of 1/0 Inco coil chain. Warning, do not exceed the working load limits for chain or components. Do not use for overhead lifting or hoisting. Do not use if the chain or components are visibly distorted or worn.
Factory number indicated thickness (inches).
ProFIT Hand Drive Roofing Nail, Head Size: 7/16 in, Head Type: Flat, Shank Type: Round, Smooth, Point Type: Diamond, 1 in L, Material Gauge: 11 ga, Steel, Electro-Galvanized, Approximate Nails per Pound: 261, Package Weight: 1 lb
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
Use for interior trim and moldings.
Finish nails are used for trim and fine finishing work where a smaller, less visible head is desired. PRO-FIT(R) finish nails come in three basic styles finish, casing and hardened trim. They are used to set door and window frames, apply trim and in other applications where appearance is important.
