Fasteners
For connections of chain and attachments (Not for overhead lifting). Do Not exceed working load limit.
ProFIT Hand Drive Roofing Nail, Head Size: 7/16 in, Head Type: Flat, Shank Type: Round, Smooth, Point Type: Diamond, 2 in L, Material Gauge: 11 ga, Steel, Electro-Galvanized, Approximate Nails per Pound: 136, Package Weight: 1 lb
Masonry nails are hardened nails designed to be driven into concrete or the mortar used to hold together bricks or cement blocks. This rigidity also lends masonry nails to a wide variety of installations ranging from attaching plywood subfloor to securing carpet tack strips.
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
Use for drywall to wood studs and all-purpose wood fastening.
Factory number indicated thickness (inches).
Masonry nails are hardened nails designed to be driven into concrete or the mortar used to hold together bricks or cement blocks. This rigidity also lends masonry nails to a wide variety of installations ranging from attaching plywood subfloor to securing carpet tack strips.
Use for interior trim and moldings.
The Deck-Drivea,,c DWP wood SS screw is a powerful fastening solution for deck, dock and general exterior applications where extra-corrosion protection is needed. With its specially-designed sharp point and unique box threads, the DWP is ideally suited for the majority of wood used in today's deck boards. Type Stainless Steel is for seaside and coastal environments. Available in bulk for hand-drive applications and in collated strips for use in our Quik DriveA(R) auto-feed screw driving system. DWP screws are also offered in a variety of sizes to fasten fascia and trim.
Use for interior trim and moldings.
Masonry nails are hardened nails designed to be driven into concrete or the mortar used to hold together bricks or cement blocks. This rigidity also lends masonry nails to a wide variety of installations ranging from attaching plywood subfloor to securing carpet tack strips.
Zinc finish. Do not exceed the working load limits for chain or components. Do not use for overhead lifting or hoisting. Do not use if the chain or components are visibly distorted or worn.
Campbell Anchor Shackle, Working Load Limit: 1/3 ton, Industrial Grade, Trade Size: 3/16 in, Inside Length: 0.87 in, Inside Width: 0.63 in, Width Between Eyes: 0.37 in, Pin Type: Screw, Pin Diameter: 1/4 in, Carbon Steel, Hot-Dipped Galvanized
Campbell Anchor Shackle, Working Load Limit: 1/2 ton, Industrial Grade, Trade Size: 1/4 in, Inside Length: 1.12 in, Inside Width: 0.78 in, Width Between Eyes: 1/2 in, Pin Type: Screw, Pin Diameter: 0.31 in, Carbon Steel, Galvanized
Campbell Anchor Shackle, Working Load Limit: 3/4 ton, Industrial Grade, Trade Size: 5/16 in, Inside Length: 1.2 in, Inside Width: 0.83 in, Width Between Eyes: 0.54 in, Pin Type: Screw, Pin Diameter: 0.37 in, Carbon Steel, Galvanized
