Rope & Chain
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 1-1/4 in ID, Chain Size: #7, Steel, Nickel-Plated
WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
Do Not use on coated cable, if used on coated cable, remove coating from assembly area.
Campbell Double Loop Chain, Working Load Limit: 365 lb, Trade Size: 4/0, Inside Link Length: 2.19 in, Low Carbon Steel, Zinc, Material Diameter: 0.16 in, 100 ft L, Links per Foot: 5.5
Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 2 in ID, Chain Size: #7B, Steel, Nickel-Plated
DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
For connections of chain and attachments (Not for overhead lifting). Do Not exceed working load limit.
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
Factory number indicated thickness (inches).
Zinc finish. Do not exceed the working load limits for chain or components. Do not use for overhead lifting or hoisting. Do not use if the chain or components are visibly distorted or worn.
Campbell Anchor Shackle, Working Load Limit: 1/3 ton, Industrial Grade, Trade Size: 3/16 in, Inside Length: 0.87 in, Inside Width: 0.63 in, Width Between Eyes: 0.37 in, Pin Type: Screw, Pin Diameter: 1/4 in, Carbon Steel, Hot-Dipped Galvanized
Campbell Anchor Shackle, Working Load Limit: 1/2 ton, Industrial Grade, Trade Size: 1/4 in, Inside Length: 1.12 in, Inside Width: 0.78 in, Width Between Eyes: 1/2 in, Pin Type: Screw, Pin Diameter: 0.31 in, Carbon Steel, Galvanized
Campbell Anchor Shackle, Working Load Limit: 3/4 ton, Industrial Grade, Trade Size: 5/16 in, Inside Length: 1.2 in, Inside Width: 0.83 in, Width Between Eyes: 0.54 in, Pin Type: Screw, Pin Diameter: 0.37 in, Carbon Steel, Galvanized
Campbell Anchor Shackle, Working Load Limit: 3-1/4 ton, Industrial Grade, Trade Size: 5/8 in, Inside Length: 2.44 in, Inside Width: 1.56 in, Width Between Eyes: 1.06 in, Pin Type: Screw, Pin Diameter: 3/4 in, Carbon Steel, Galvanized
