Lighting & Electric

Lighting & Electric

Fixtures, bulbs, timers, and dimmers to custom brighten your days.

1,140 found, showing page 2 of 76

$9.99
BODY CONDUIT PVC TYPE LB 1.5IN

Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance.

$4.99
Carlon E977HC-CTN Conduit Clamp, PVC, Gray

Offers same chemical resistance as carbon non-metallic conduit for a complete, corrosion-resistant system. UV-resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts and 2 washers. Gray clamps for standard conduit.

$25.99
JM Eagle 67488 Rigid Conduit, 1-1/2 in, 10 ft L, PVC

JM Eagle's Schedule 40 and Schedule 80 PVC rigid non-metallic conduit is designed and produced for use in both above-ground and underground installations.

$3.79
Carlon UA7AGB-CAR Conduit Elbow, 45 deg Angle, PVC, Gray

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.

$4.99
Carlon UA9AGB-CTN Conduit Elbow, 90 deg Angle, PVC, Gray

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. SCH 40. UL 651 Listed to the NEC by the ETL, UL listed.

$2.79
Carlon E977GC-CTN Conduit Clamp, PVC, Gray

Offers same chemical resistance as carbon non-metallic conduit for a complete, corrosion-resistant system. UV-resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts and 2 washers. Gray clamps for standard conduit.

$0.99
Carlon E940GR-CTN Conduit Coupling, 1-1/4 in Socket, 1.535 in ID x 1.98 in

Safe, non-conductive. SCH 40 non-metallic socket type coupling for joining SCH 40 non-metallic conduit. Will not rust or corrode. RoHS compliance, UL listed.

$0.99
Carlon E942GR-CTN Conduit Adapter, 1-1/4 in FPT x Socket, 1-63/64 in Dia, 2

Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.

$1.69
Carlon E943GR-CTN Terminal Adapter, 1-1/4 in MPT x Socket, 1.97 in Dia, 1.98

Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.. UL listed, RoHS Compliance.

$7.59
Carlon E986GR Conduit Body, 1-1/4 in Hub, PVC, Gray

Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL listed, RoHS Compliance.

$0.59
Halex 61612B Conduit Strap, Steel

To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.

$21.99
JM Eagle 67470 Rigid Conduit, 1-1/4 in, 10 ft L, PVC

JM Eagle's Schedule 40 PVC rigid non-metallic conduit is designed and produced for use in both above-ground and underground installations.

$1.69
Carlon UA7ADB-CTN Conduit Elbow, 45 deg Angle, PVC, Gray

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.

$1.19
Carlon UA9ADB-CTN Conduit Elbow, 90 deg Angle, PVC, Gray

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. SCH 40. UL 651 Listed to the NEC by the ETL, UL listed.

$5.99
BODY CONDUIT PVC TYPE LB 1/2IN

Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance.

Page