Lighting & Electric
Fixtures, bulbs, timers, and dimmers to custom brighten your days.
For use in branch circuit wiring in wet, damp or dry locations. Designed for use as a weatherproof junction box and used with Bell round cluster covers and round lamp holder combinations. Die-cast aluminum construction. Powder coat finish. Reinforced connector outlets. Cast-in mounting lugs, four closure plugs included and installed ground screw. 16.1 cu-in capacity. Six 10-24 tapped holes. 4 in Dia x 1-1/2 in D. UL listed.
For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.
Indoor or outdoor applications. Use to secure rigid or I.M.C. conduit to wood, masonry or similar surfaces.
For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. SCH 40. UL 651 Listed to the NEC by the ETL, UL listed.
Offers same chemical resistance as carbon non-metallic conduit for a complete, corrosion-resistant system. UV-resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts and 2 washers. Gray clamps for standard conduit.
Safe, non-conductive. SCH 40 non-metallic socket type coupling for joining SCH 40 non-metallic conduit. Will not rust or corrode. RoHS compliance, UL listed.
Carlon Conduit Adapter, 1 in Trade, Female Connection, PVC, Gray, 1-15/16 in Length, 1-5/8 in Diameter, Suitable for: SCH 40 and 80 Conduits
Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.. UL listed, RoHS Compliance.
Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance.
JM Eagle's Schedule 40 and Schedule 80 PVC rigid non-metallic conduit is designed and produced for use in both above-ground and underground installations.
For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.
For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. SCH 40. UL 651 Listed to the NEC by the ETL, UL listed.
Carlon Standard Coupling, 1-1/2 in Trade, PVC, Gray, 2-3/8 in Length, 1.755 in ID x 2.2344 in OD Diameter, Suitable for: SCH 40 and 80 Conduits
Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.
