Hand Tools
Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper.
Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
Ideal for plumbing and air applications.
Cuts internal threads in pipes, tapered at a rate of 3/4 in/ft, nominal size of the tap is that of the pipe fitting being tapped, four flutes. Used in applications such as pipe fittings.
Made of forged alloy tool steel with polished head. Two electronically induction hardened durable wire cutters, two staple grips in nose and corrugated hammer head, heavy prong. Special opening in head allows both wire and staple to be gripped. Dual head jaw with standard edge. Cut capacity of 11 AWG. Red non-slip cushion handle grips.
Rounded on one side, flat on opposite, flat sides of all half-round files are double cut, backs are double cut. Used on concave, convex and flat surfaces.
The Crescent Nicholson single-cut bastard mill files sharpen mill or circular saws and are ideal for draw filing and finishing metals. The rectangular shape lets you smooth and sharpen straight surfaces. Two square edges allow you to make grooves fixed at the same width as the file and all sizes taper slightly in width to improve access in slots.
Primarily used to file circular openings or concave surfaces; tapered slightly towards point.
High carbon steel self aligning taps, ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is needed. Used for hand threading work in a variety of materials; produces class 2B thread. Tap size and recommended drill bit size is laser etched on each tool for easy identification.
High-carbon steel self aligning taps, ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is needed. Used for hand threading work in a variety of materials, produces class 2B thread. Tap size and recommended drill bit size is laser etched on each tool for easy identification.
Each handle comes with the required wedges, rivets or epoxy needed for proper application to the tool head. 19-better quality American hickory with a clear lacquer finish.
Die can be used with a wrench or socket when space is limited. Recommended for use with hexagon die stock. Used in applications such as maintenance and repair work.
Straight flutes are ground to provide rapid chip removal for efficient threading, for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
